The 3-litre six cylinder Bi-Turbo diesel engine sets standards in terms of power, torque and efficiency. The outstanding base engine from BMW is constructed entirely from light-weight aluminium and features latest-generation common rail direct fuel injection as well as a two-stage turbocharging with variable turbine geometry. Effective optimisation of pressure losses and special intake air ducts exploit the full engine potential and lead to significant gains in power output and enhanced engine characteristics. By also utilising the achievable boost and injection pressure a maximum power output of 257 kW (350 hp) at 4000 rpm and an impressive 700 Nm of torque between 1500 and 3000 rpm is achieved. The throughput of the cooling system has a major influence on the performance of turbocharged engines. Full power delivery even under the highest thermodynamic loads is ensured by the high-performance cooling package, which comprises a large-volume intercooler with optimised intake and outlet ports as well as two radiators located in front of the wheel arches for optimum effectiveness. Despite its impressive performance characteristics and high specific power output, this drivetrain is also extremely economical. Long cruising ranges are achieved effortlessly thanks to a combined fuel consumption measured according to ECE norm (NEDC) of only 5.6 to 5.3 l/100 km and CO2 emissions of 147 to 139 g/km, depending on the model.
The construction and design of the exhaust system, made from high-quality materials, guarantees an elegant look and emotional acoustics foregoing the need for technical compromises. The silencer volume is reduced to a minimum in order to optimise the exhaust gas flow characteristics and to reduce weight. Simultaneously the exhaust system produces a pleasingly rich sound for a diesel vehicle, particularly at higher engine speeds. Downstream of the middle silencer, the specific pipe routing is realised in stainless steel and ends in the two elliptical twin tailpipes typical for ALPINA, with discreet ALPINA and Akrapovič lettering.
Information on fuel consumption and CO2 emissions according to the applicable EU Directive VO (EU) 715/2007:
BMW ALPINA D4 BITURBO Coupé Convertible
Fuel consumption, combined: 5.3 l/100 km 5.9 l/100 km
CO2 emissions combined: 139 g/km 155 g/km
CO2 efficiency category: B B
Errors and changes excepted.
Further information on specific fuel consumption and specific CO2 emissions of new passenger cars is given in „Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen” which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT), Helmut-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen.
Determined on the basis of the measured CO2 emissions taking into account the mass of the vehicle.