the great CLASS of LUXURY The BMW ALPINA B7 leads the ALPINA model portfolio, impressing aficionados around the world with its exceptional performance and unsurpassed driving experience. With the introduction of the new model year in 2019, the BMW ALPINA B7 enters a new era – sharp, luxurious and performant! The BMW ALPINA B7´s stunning design strikes a balance between luxurious elegance and dynamic presence. Both the front, characterized by a demanding BMW kidney grill and subtle free-floating ALPINA lettering, and the rear, with polished stainless steel tailpipes and diffusor, underline the breathtaking performance potential of this luxury super saloon. ALPINA styling, aerodynamic elements and iconic wheels integrate seamlessly to create an elegant and exclusive appearance. The latest generation 4.4 litre V8 engine with Bi-Turbo charging delivers 447 kW (608 hp) and 800 Nm (590 lb-ft) of torque. With a significant increase in power and torque at lower rpm and advanced transmission technology, the new BMW ALPINA B7 accelerates from 0 to 100 km/h (0 to 62 mph) in just 3.6 seconds and can reach a maximum speed of 330 km/h (205 mph). Fuel consumption and CO2 emissions are measured according to the new WLTP test procedures. The new BMW ALPINA B7 fulfils the latest Euro 6d emission standards and features petrol particulate filters that reduce the emissions to a minimum. Fuel consumption combined according to Regulation (EC) 715/2007 in its current version is 11.6 l/100 km with CO2 emissions of 265 g/km*. * Preliminary Data. Stated fuel consumption and CO2 emissions are measured pursuant to EU Regulation 715/2007 in its applicable version. For more information please see technical data at the end of this press information.

POWERFUL elegant APPEARANCE The design of the 7 Series, the quintessential BMW flagship saloon, has for generations been characterised by a progressive, sportive elegance. The iconic BMW kidney grill has grown significantly and dominates together with new headlights the powerful front end. The new modern and dynamic appearance of the ALPINA styling and aerodynamic elements accentuate the dynamic and visual presence of the BMW ALPINA B7 and its performance character. The front apron with functional air intakes, free- floating ALPINA lettering and horizontal character lines works in conjunction with the rear spoiler in order to effectively reduce lift to almost zero at the front and rear axle for excellent high-speed stability. The ALPINA stainless steel sports exhaust system features two elliptical twin tailpipes that are neatly integrated in the rear apron and give the rear a smooth, elegant look. The exclusive paint finishes in ALPINA Blue metallic and ALPINA Green metallic are a hallmark feature reserved solely for BMW ALPINA automobiles. A wide range of other BMW and BMW Individual paint finishes are also available.

sharp DYNAMICS and unrivalled COMFORT The BMW ALPINA B7 combines the latest suspension technology to offer exceptional ride comfort at any speeds as well as unrivalled agility and precision handling. BMW xDrive intelligent all-wheel-drive system with ALPINA calibration, the two-axle air suspension system combined with Dynamic Damper Control and Active Comfort Drive with Road Preview guarantees the very highest level of driving comfort while the Active Roll Stabilization minimizes body roll during cornering. The rear-axle steering of the the BMW ALPINA B7 class-leading levels of dynamic performance and light-footed handling. Integral Active Steering system gives In conjunction with the high-performance drivetrain and the all-wheel drive system, the Integral Active Steering offers a dynamic driving experience par excellence. It combines a variable ratio electric steering system. Specially calibrated to the ALPINA suspension and MICHELIN® performance tyres* the rear axle steers opposed to the front axle at low speeds for increased agility and dynamic handling. Conversely at higher speeds the rear axle steers with the front axle for maximum directional stability. A revised ALPINA brake system with blue brake calipers, now utilising brake-by-wire technology, combines powerful stopping power with consistent brake pedal feedback. * EU-Tyre label: measuring 255/40 ZR20 at the front and 295/35 ZR20 at the rear (EU-Tyre label: E/A / 71dB front, C/A / 73dB rear)

HIGH-TECH for highest DEMANDS The BMW ALPINA B7 now comes with advanced driver assistance systems of the latest generation such as the Driving Assistant Professional. This offers even more active safety with a wealth of new functions including Active Lane Keeping and Steering and Traffic Jam assistance. The advanced full-colour digital instrument display features a new ALPINA design with a classic or dynamic visualisation depending on the selected driving mode. Features such as a full-colour head-up display, a rear view camera, and the latest BMW navigation and communication systems support effortless driving.

luxurius AMBIANCE range of standard equipment An extensive ensures well-being and comfort for driver and passengers alike. High-end Nappa leather, multi- functional comfort seats, leather instrument panel, ceramic inserts on control elements and soft close doors come as standard. Subtle ALPINA detailing adds exclusivity and individual style to BMW ALPINA B7’s interior. Hand- finished using exceptionally high-quality LAVALINA leather, the sports steering wheel with blue and green stitching is captivating at the very first touch due to its luxurious feel. Contemporary Piano lacquer or classic Myrtle Luxury Wood interior trim, door sills with blue illumination, ALPINA B7 model inscriptions and an individual production plaque are further examples of exclusive equipment features. There are virtually no limits to customers’ wishes when it comes to customising the design of their automobile. From paint finishes to interior trim finishers and upholstery colours – everything the extensive program of BMW and ALPINA equipment has to offer can be selected. For individual wishes, the ALPINA saddlery exclusively uses LAVALINA leather - the most natural and highest quality leather type available worldwide which offers all the advantages of untreated full-grain cowhide. To create a luxurious and comfortable environment, the comfort and climate characteristics of this exceptional leather are unique.

smooth PERFORMANCE, EXPLOSIVE power delivery twin-scroll The BMW ALPINA B7 impresses with direct responsiveness and a dynamic power delivery over the entire rpm range. Continuous developments and detailed enhancements mean the combination of high torque output and a transmission with great dynamic capabilities results in unique driving performance. The latest generation 4.4-liter V8 engine with two turbochargers, petrol direct injectionand Valvetronic, delivers 447 kW (608 hp) and 800 Nm (590 lb-ft) of torque. Peak torque is available in a broad range between 2000 rpm and 5000 rpm, this results in excellent throttle response, engaging power delivery and accessible performance in the most relevant rpm range. The ALPINA high-performance cooling system ensures thermal stability even under permanent high loads. latest The BMW ALPINA B7 generation 8-Speed Sport-Automatic Transmission from ZF (8HP76) with ALPINA SWITCH-TRONIC. features the transmission software has been adapted The specifically to the performance characteristics of the engine, offering exceptional driving comfort and dynamic performance in all situations. Close gear ratios and a total spread of 7.81:1 results in high level of shift comfort and efficiency. In Automatic Mode the combination of eight gears and high engine torque facilitate relaxed cruising at low engine rpm even when travelling at higher speeds. In Sport Mode the shift times have been further improved and are now considerably quicker and more energetic. The stainless steel ALPINA sports exhaust system is responsible for a reduction in back pressure and weight. Active exhaust valves allow the driver to influence the sound experience by using the Driving Experience Control switch to select between Comfort and Sport Mode. In typical ALPINA fashion: the two twin tailpipes of the exhaust system are integrated elegantly and aesthetically into the rear apron.

T E C H N I C A L D ATA B M W A L P I N A B 7 L O N G - W H E E L B A S E AW D This is a translation of the original German brochure which fulfils the requirements of German law. All technical data in this brochure apply to the German market, additional international units of measure shown in the technical data for the purposes of information only. Further information on specific fuel consumption and CO2 emissions of new passenger cars is provided by the ‚Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen‘ which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT) or online https://www.dat.de/co2/. 1 2 3 Stated fuel consumption and CO2 emissions are measured pursuant to EU Regulation 715/2007 in its applicable version. From 1st of September 2018 the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) has replaced the New European Driving Cycle (NEDC). Regardless of the applied test procedure, it is currently still mandatory to state fuel consumption and CO2 emissions according to NEDC, hence stated values are determined based on the WLTP test procedure and are converted to NEDC for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that stated here. The provision of additional fuel consumption and CO2 emissions as determined according to WLTP is currently voluntary until their provision becomes mandatory by law. The figures quoted includes a 90 % tank filling, 68 kg for the driver an 7 kg for luggage. Unladen weight applies to vehicles with standard equipment. Optional equipment may increase this figure. EU-tyre label = fuel efficiency / wet grip / external rolling noise class. 4 Modifications and errors excepted. ENGINE 4 Cylinders Capacity Bore Stroke Compression ratio Max output Max output at Max torque Max torque at rpm Engine management Fuel type Emission classification TRANSMISSION 4 PERFORMANCE 4 Acceleration 0-100 km/h / 0-62 mph Acceleration 0-200 km/h / 0-125 mph Top speed cm³ mm mm :1 kW (hp) rpm Nm / lbs-ft rpm V8 90° 4395 89.0 88.3 10.5 447 (608) 5500 - 6500 800 (590) 2000 - 5000 BOSCH DME 8.8.T Super Plus Euro 6d - ISC Type 8-Speed Sport-Automatic (ZF 8HP76) with SWITCH-TRONIC Transmission ratios :1 1st gear 5.00 5th gear 1.31 2nd gear 3.20 6th gear 1.00 3rd gear 2.14 7th gear 0.82 4th gear 1.72 8th gear 0.64 :1 :1 7.81 3.48 2.81 Overall gear ratio Reverse gear ratio Final drive ratio CONSUMPTION 1,4 Official Fuel Consumption NEDC correlated Urban Extra-urban Combined Official CO2 emissions NEDC correlated Combined CO2 efficiency (Germany) Additional Information WLTP Fuel consumption WLTP combined CO2 emissions WLTP combined s s km/h mph l/100 km mpg l/100 km mpg l/100 km mpg g/km l/100 km g/km 3.6 11.9 330 205 15.9 14.8 8.3 28.3 11.1 21.2 252 F 11.6 264 DIMENSIONS 4 Length Width Height, unladen Wheelbase Track, front Track, rear Luggage capacity Fuel tank, approx. WEIGHT 4 Unladen (EU)² Max permissible Permitted load Max axle load: front rear mm mm mm mm mm mm l l kg kg kg kg kg 5268 1902 1491 3210 1622 1619 515 78 2180 2775 670 1340 1455 WHEELS & TYRES 4 ALPINA CLASSIC 20“ forged wheels with MICHELIN Super Sport* front EU-tyre label 3 rear EU-tyre label 3 8.5 x 20” with 255/40 ZR20 (101Y) XL 71 dB E/A/ 10 x 20” with 295/35 ZR20 (105Y) XL 73 dB C/A/ * ALPINA CLASSIC 21“ forged wheels optionally available

ALPINA RECYCLING Your BMW ALPINA is part of an all-embracing recycling concept. Recycling demands are already considered early in the development process of a BMW ALPINA. An example of this is in the selection of materials – they are chosen, such that they are environmentally friendly and easily recyclable, using a minimum of resources to do so. Every BMW ALPINA is built so that it is easily and cost-effectively recyclable at the end of its useable life span. All this occurs in close co-operation between BMW and ALPINA. BMW Group has built a European-wide redemption and recycling infrastructure, and require high quality and environmental standards. For return of your automobile for the purpose of recycling, please contact your BMW ALPINA partner. They are ready to help. For further information about recycling firms and redemption locations, please see www.bmw.com. This is an information brochure which fulfils the requirements of German law. All technical data in this brochure apply to right-hand drive models, additional international units of measure shown in the technical data are for the purposes of information only. The models illustrated in this brochure may show the specifications of vehicles produced for Germany or another market. In part, the specifications include optional equipment and accessories not fitted as standard. According to the specific requirements of other markets or countries, alterations in models, technical data, standard and optional equipment may occur. Not all model versions may be available in your country. For precise information on model features, equipment, fuel consumption and CO2 emissions as they apply to your country please contact your local BMW ALPINA dealer or importer. Errors and omissions excepted. Subject to modifications. March 2019. © ALPINA. Not to be reproduced wholly or in part without written permission of ALPINA Burkard Bovensiepen GmbH + Co. KG, Buchloe, Germany. | WWW.ALPINA-AUTOMOBILES.COM | WWW.FACEBOOK.COM /ALPINAAUTOMOBILE | WWW.YOUTUBE.COM/ALPINAAUTOMOBILES | ALPINA Burkard Bovensiepen GmbH + Co. KG • Alpenstraße 35-37 • 86807 Buchloe • +49 (0) 8241- 5005-0 88 04 523 - 0319 Printed in Germany 0.7 © ALPINA