BMW ALPINA B3

Technical Data

BMW ALPINA B3 Saloon AWD

Engine

Cylinders6 in line
Capacity (cc)2993
Bore (mm)84,0
Stroke (mm)90,0
Compression ratio (:1)9,3
Max output (kW (hp) / rpm)364 (495) / 5000-7000
Max torque (Nm / 1/min)730 / 2500-4500
Engine managementBOSCH DME 8.6 S
Fuel type98-octane
Emissions classificationEuro 6d-ISC-FCM

Performance

Acceleration 0-100 km/h (s)3,6
Top speed (km/h)305

Fuel consumption *

WLTP Combined (l/100km)10,1
WLTP CO2 emissions combined (g/km)229

Transmission

Type8-Speed Sport-Automatic ZF 8HP76 SWITCH-TRONIC
1st5,00
2nd3,20
3rd2,14
4th1,72
5th1,31
6th1,00
7th0,82
8th0,64
Final drive ratio2,81

Wheels and tyres

Standard wheels and tyresALPINA DYNAMIC 19"
Front8,5 x 19 255/35 ZR19
Rear9,5 x 19 265/35 ZR19

Dimensions

Length (mm)4723
Width (mm)1827 (2068)
Height, unladen (mm)1440
Wheelbase (mm)2851
Track, front (mm)1577
Track, rear (mm)1572
Luggage capacity (l)480
Fuel tank capacity (l)ca. 59

Weight

Unladen (EU) (kg)1875
Max permissible (kg)2340
Permitted load (kg)540
Max axle load, front (kg)1155
Max axle load, rear (kg)1255
Max trailer load, braked (kg)1800
Max trailer load, unbraked (kg)750

* Information on fuel consumption and CO2 emissions according to the applicable EU Directive VO (EU) 715/2007.

The disclosed fuel consumption and CO2 emissions are measured according to WLTP (Worldwide Harmonized Light-Duty Vehicles Test Procedure) and converted to NEDC (New European Driving Cycle) for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that shown here.

Further information on specific fuel consumption and specific CO2 emissions of new passenger cars is given in „Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen” which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT), Helmut-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen.

Stated fuel consumption and CO2 emissions are measured pursuant to EU Regulation 715/2007 in its applicable version. From 1st of September 2018 the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) has replaced the New European Driving Cycle (NEDC).

From January 2021 onwards, European Union member states are required to ensure that new passenger cars offered for sale, for lease or exhibited in showrooms or similar, are clearly labelled with consumption and emission data according to the new WLTP test cycle. Work is currently underway on the amendment of the German regulatory framework which governs the implementation of this European Union obligation in German law, its final completion however is still outstanding. For a number of new vehicles, NEDC consumption and emission values are no longer available, it is therefore reasonable that the more realistic WLTP consumption and emission values are provided to customers instead.

The official manufacturer consumption and emission values have already been determined on the basis of the new WLTP test cycle and, for some models, calculated back to NEDC test cycle for information purposes. The WLTP values are used for the assessment of taxes.

All technical data apply to the German market, additional international units of measure shown in the technical data for the purposes of information only. Further information on specific fuel consumption and CO2 emissions of new passenger cars is provided by the ‚Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen‘ which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT) or online https://www.dat.de/co2/.

Modifications and errors excepted.